Virtual Machine Appliances


The Graylog Virtual Machine Appliance was designed only as a showcase of Graylog and its cluster mode. This appliance is intended for proof of concept, testing, lab or other such applications. Please, deploy this appliance in a network that is isolated from the internet. In most cases, Graylog does not recommend using this appliance in a production environment.

Please review the notes about production readiness!


Download the OVA image. If you are unsure what the latest version number is, take a look at our release page.

Run the image

You can run the OVA in many systems like VMware or Virtualbox. In this example we will guide you through running the OVA in the free Virtualbox on OSX.

In Virtualbox select File -> Import appliance:


Hit Continue and keep the suggested settings on the next page as they are. Make sure that you have enough RAM and CPUs on your local machine. You can lower the resources the virtual machine will get assigned but we recommend to not lower it to ensure a good Graylog experience. In fact you might have to raise it if you plan to scale out later and send more messages into Graylog.

Press Import to finish loading the OVA into Virtualbox:


You can now start the VM and should see a login shell like this when the boot sequence is completed:



If you don’t have a working DHCP server for your virtual machine, you will get the error message:

“Your appliance came up without a configured IP address. Graylog is probably not running correctly!”

In this case, you have to login and edit /etc/network/interfaces in order to setup a fixed IP address. Then manually reconfigure Graylog as shown in the following paragraphs.

Logging in

You can log into the shell of the operating system of the appliance with the user ubuntu and the password ubuntu. You should of course change those credentials.

The web interface is reachable on port 80 at the IP address of your virtual machine. The login prompt of the shell is showing you this IP address, too. (See screenshot above). DHCP should be enabled in your network otherwise take a look into the graylog-ctl command to apply a static IP address to the appliance.

The standard user for the web interface is admin with the password admin.

Basic configuration

We ship the graylog-ctl tool with the virtual machine appliances to get you started with a customized setup as quickly as possible. Run these (optional) commands to configure the most basic settings of Graylog in the appliance:

sudo graylog-ctl set-email-config <smtp server> [--port=<smtp port> --user=<username> --password=<password>]
sudo graylog-ctl set-admin-password <password>
sudo graylog-ctl set-timezone <zone acronym>
sudo graylog-ctl reconfigure

The graylog-ctl has much more functionality documented. We strongly recommend learning more about it to ensure smooth operation of your virtual appliance.

VMWare tools

If you are using the appliance on a VMWare host, you might want to install the hypervisor tools:

sudo apt-get install -y open-vm-tools

Update OVA to latest Version

You can update your Appliance to the newest release without deploying a new template.

Production readiness

The Graylog appliance is not designed to provide a production ready solution. It is built to offer a fast and easy way to try the software itself.

If you must use an appliance in production, please harden the security of the box before deployment.

Graylog recommends the following minimum steps be taken

  • Set another password for the default ubuntu user
  • Disable remote password logins in /etc/ssh/sshd_config and deploy proper ssh keys
  • Deploy appliance on a network that is properly isolated and secured against access from unauthorized sources. Under no circumstances should the appliance be reachable from the public internet.
  • Add additional RAM to the appliance and raise the java heap!
  • Add additional HDD to the appliance and extend disk space.
  • Add the appliance to your monitoring and metric systems.

If you need to create your own production ready setup take a look at our other installation methods.