This guide describes the fastest way to install Graylog on SLES 12 SP3. All links and packages are present at the time of writing but might need to be updated later on.
This setup should not be done on publicly exposed servers. This guide does not cover security settings!
The following patterns are required for a minimal setup (see SLES 12 SP3 Deployment Guide):
- Base System - Minimal System (Appliances) - YaST configuration packages
This Guide assumes that the firewall is disabled and communication is possible to the outside world.
Assuming a minimal setup, you have to install the Java runtime environment:
$ sudo zypper install java-1_8_0-openjdk
Installing MongoDB on SLES should follow the tutorial for SLES from the MongoDB documentation. Add the GPG key and the repository before installing MongoDB:
$ sudo rpm --import https://www.mongodb.org/static/pgp/server-4.0.asc $ sudo zypper addrepo --gpgcheck "https://repo.mongodb.org/zypper/suse/12/mongodb-org/4.0/x86_64/" mongodb $ sudo zypper -n install mongodb-org
In order to automatically start MongoDB on system boot, you have to activate the MongoDB service by running the following commands:
$ sudo chkconfig mongod on $ sudo systemctl daemon-reload $ sudo systemctl restart mongod.service
Graylog 2.5.x should be used with Elasticsearch 6.x, please follow the installation instructions from the Elasticsearch installation guide.
First install the Elastic GPG key with
rpm --import https://artifacts.elastic.co/GPG-KEY-elasticsearch then add the repository file
/etc/zypp/repos.d/elasticsearch.repo with the following contents:
[elasticsearch-6.x] name=Elasticsearch repository for 6.x packages baseurl=https://artifacts.elastic.co/packages/oss-6.x/yum gpgcheck=1 gpgkey=https://artifacts.elastic.co/GPG-KEY-elasticsearch enabled=1 autorefresh=1 type=rpm-md
followed by the installation of the latest release with
sudo zypper install elasticsearch-oss.
Make sure to modify the Elasticsearch configuration file (
/etc/elasticsearch/elasticsearch.yml) and set the cluster name to
graylog additionally you need to uncomment (remove the # as first character) the line, and add
action.auto_create_index: false to the configuration file:
cluster.name: graylog action.auto_create_index: false
In order to automatically start Elasticsearch on system boot, you have to activate the Elasticsearch service by running the following commands:
$ sudo chkconfig elasticsearch on $ sudo systemctl daemon-reload $ sudo systemctl restart elasticsearch.service
First install the Graylog GPG Key with
rpm --import https://packages.graylog2.org/repo/debian/keyring.gpg then add the repository file
/etc/zypp/repos.d/graylog.repo with the following content:
[graylog] name=graylog baseurl=https://packages.graylog2.org/repo/el/stable/2.5/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-graylog
After that, install the latest release with
sudo zypper install graylog-server.
Make sure to follow the instructions in your
/etc/graylog/server/server.conf and add
root_password_sha2. These settings are mandatory and without them, Graylog will not start!
You can use the following command to create your
cat /dev/urandom | base64 | cut -c1-96 | head -1
You need to use the following command to create your
echo -n "Enter Password: " && head -1 </dev/stdin | tr -d '\n' | sha256sum | cut -d" " -f1
To be able to connect to Graylog you should set
web_listen_uri to the public host name or a public IP address of the machine you can connect to. More information about these settings can be found in Configuring the web interface.
If you’re operating a single-node setup and would like to use HTTPS for the Graylog web interface and the Graylog REST API, it’s possible to use NGINX or Apache as a reverse proxy.
The last step is to enable Graylog during the operating system’s startup:
$ sudo chkconfig graylog-server on $ sudo systemctl daemon-reload $ sudo systemctl start graylog-server.service
If you plan to have multiple servers assuming different roles in your cluster like we have in this big production setup you need to modify only a few settings. This is covered in our Multi-node Setup guide. The default file location guide lists the locations of the files you need to modify.
Please file a bug report in the GitHub repository for the operating system packages if you run into any packaging related issues.
If you found this documentation confusing or have more questions, please open an issue in the Github repository for the documentation.