This guide describes the fastest way to install Graylog on Debian Linux 8 (Jessie). All links and packages are present at the time of writing but might need to be updated later on.
This setup should not be done on publicly exposed servers. This guide does not cover security settings!
Not all required dependencies are available in the standard repository, so we need to add Debian Backports to the list of package sources:
$ sudo echo "deb http://ftp.debian.org/debian jessie-backports main" > /etc/apt/sources.list.d/backports.list $ sudo apt-get update && sudo apt-get upgrade
If you’re starting from a minimal server setup, you will need to install these additional packages:
$ sudo apt-get install apt-transport-https openjdk-8-jre-headless uuid-runtime pwgen
The version of MongoDB included in Debian Jessie is recent enough to be used with Graylog 2.0.0 and higher:
$ sudo apt-get install mongodb-server
Graylog 2.0.0 and higher requires Elasticsearch 2.x, so we took the installation instructions from the Elasticsearch installation guide:
$ wget -qO - https://packages.elastic.co/GPG-KEY-elasticsearch | sudo apt-key add - $ echo "deb https://packages.elastic.co/elasticsearch/2.x/debian stable main" | sudo tee -a /etc/apt/sources.list.d/elasticsearch-2.x.list $ sudo apt-get update && sudo apt-get install elasticsearch
Make sure to modify the Elasticsearch configuration file (
/etc/elasticsearch/elasticsearch.yml) and set the cluster name to
graylog additionally you need to uncomment (remove the # as first character) the line:
After you have modified the configuration, you can start Elasticsearch:
$ sudo systemctl daemon-reload $ sudo systemctl enable elasticsearch.service $ sudo systemctl restart elasticsearch.service
Now install the Graylog repository configuration and Graylog itself with the following commands:
$ wget https://packages.graylog2.org/repo/packages/graylog-2.1-repository_latest.deb $ sudo dpkg -i graylog-2.1-repository_latest.deb $ sudo apt-get update && sudo apt-get install graylog-server
Follow the instructions in your
/etc/graylog/server/server.conf and add
root_password_sha2. These settings are mandatory and without them, Graylog will not start!
You need to use the following command to create your
echo -n yourpassword | sha256sum
To be able to connect to Graylog you should set
web_listen_uri to the public host name or a public IP address of the machine you can connect to. More information about these settings can be found in Configuring the web interface.
If you’re operating a single-node setup and would like to use HTTPS for the Graylog web interface and the Graylog REST API, it’s possible to use NGINX or Apache as a reverse proxy.
The last step is to enable Graylog during the operating system’s startup:
$ sudo systemctl daemon-reload $ sudo systemctl enable graylog-server.service $ sudo systemctl start graylog-server.service
Multiple Server Setup¶
If you plan to have multiple server taking care of different roles in your cluster like we have in this big production setup you need to modify only a few settings. This is covered in our Multi-node Setup guide. The default file location guide will give you the file you need to modify in your setup.
Please file a bug report in the GitHub repository for the operating system packages if you run into any packaging related issues.
If you found this documentation confusing or have more questions, please open an issue in the Github repository for the documentation.