Virtual Machine Appliances¶
Run the image¶
In Virtualbox select File -> Import appliance:
Hit Continue and keep the suggested settings on the next page as they are. Make sure that you have enough RAM and CPUs on your local machine. You can lower the resources the virtual machine will get assigned but we recommend to not lower it to ensure a good Graylog experience. In fact you might have to raise it if you plan to scale out later and send more messages into Graylog.
Press Import to finish loading the OVA into Virtualbox:
You can now start the VM and should see a login shell like this when the boot completed:
You can log into the shell of the operating system of the appliance with the user ubuntu and the password ubuntu. You should of course change those credentials if you plan to go into production with the appliance.
The web interface is reachable on port 80 at the IP address of your virtual machine. The login prompt of the shell is showing you this IP address, too. (See screenshot above)
The standard user for the web interface is admin with the password admin.
We are shipping the
graylog-ctl tool with the virtual machine appliances to get you started
with a customised setup as quickly as possible. Run these (optional) commands to configure the
most basic settings of Graylog in the appliance:
sudo graylog-ctl set-email-config <smtp server> [--port=<smtp port> --user=<username> --password=<password>] sudo graylog-ctl set-admin-password <password> sudo graylog-ctl set-timezone <zone acronym> sudo graylog-ctl reconfigure
graylog-ctl has much more functionality and is documented here.
We strongly recommend to learn more about it to ensure smooth operation of your virtual appliance.